| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
CAUTION
BE CAREFUL NOT TO DAMAGE VALVE WHEN INSTALLING. IF DAMAGED THE
LEAST BIT, REPLACE VALVE.
NOTE
Proceed to next step (3) only if idler gear and/or drive gear was removed from its
shaft. If gears not removed, proceed to step (4).
(3) Press idler gear and/or drive gear onto its shaft 0.680 - 0.690 in. (17.272 - 17.526 mm) away from gear
body end of shaft.
NOTE
Be sure all parts are clean.
(4) Lubricate and install idler shaft in gear body pocket nearest locating notch on body.
(5) Lubricate and install drive shaft in gear body pocket.
(6) Install new gasket on gear cover.
3-301
|
||
|
||
