| Tweet |
Custom Search
|
|
|
||
 TM 9-2815-226-34-2
(17) Tighten capscrews alternately, slowly, and evenly to properly seat and secure caps in position. Torque
capscrews as follows:
(a) Torque each capscrew in sequence as shown, 85 ft lbs (115 N m), at a time until each capscrew is
torqued to 300-310 ft lbs (407 - 420 Nm).
(b) Loosen each capscrew a minimum of 3 turns and repeat step 17 (a).
(18) Secure dial indicator to rear of cylinder block with indicator contact point acting against end face of
crankshaft flange.
3-405
|
||
|
||
