Quantcast Install real cover and oil seal.

Custom Search
 
  
 
TM 9-2815-226-34-2
(11)
If wobble exceeds specification, remove damper assembly and inspect pulley and crankshaft
mating surfaces for nicks, burrs, distortions and foreign matter.
(12)
Remove minor defects with emery cloth. Replace distorted pulley.
(13)
If no defects found, separate damper and pulley and check their mating surfaces for nicks, burrs,
distortions and foreign matter.
(14)
Remove minor defects with emery cloth. Replace distorted parts.
(15)
Reassemble pulley and damper.
(16)
Install assembly and remeasure out-of-round and wobble.
u.
Install water pump and idler assembly (TM 9-2320-281-20).
v.
Install water pumps and idler assembly drive belt (TM 9-2320-281-20).
w.
Install fan bracket (TM 9-2320-281-20).
x.
Install real cover and oil seal.
(1)
Rotate engine upside down.
'
(2)
Position new rear cover gasket and cover on cylinder block.
(3)
Install capscrews and lockwashers. Tighten capscrews finger tight.
3-441


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +