OIL SEAL MUST BE INSTALLED WITH SEAL LIP AND CRANKSHAFT OUTSIDE
DIAMETER CLEAN AND DRY. USE OF LUBRICANT OF ANY KIND MAY CAUSE
Clean crankshaft oil seal mating surface with crocus cloth and wipe clean.
A new rear oil seal is shipped from manufacturer with sleeve installed in the seal
lip. Sleeve protects lip during shipment and is used as an installation tool.
Place larger insid e diameter portion of shipping/installation sleeve over end of crankshaft.
Carefully push seal off sleeve onto crankshaft. Remove sleeve and discard.
Reinstall pins in ST-997 rear oil seal driver.
Place driver behind oil seal and carefully drive seal into cover with softfaced hammer.
Wipe assembly clean.