TM 9-2815-237-34
2-32. FUEL INJECTION PUMP REPAIR (Cont’d)
54.
55.
56.
57.
58.
59.
60.
61.
62.
Inspect throttle shaft (3) for distortion or damage. Replace if distorted or damaged.
NOTE
Perform step 55 only if throttle shaft was replaced.
Install low idle screw (1), spring (2), max travel screw (4), and nut (5) in throttle shaft (3).
Inspect rubber connectors (6) for deterioration, cracks, or damage. Replace if cracked, deteriorated,
or damaged.
Inspect pump cover (7) for damage. Replace if damaged.
Inspect check valve (8) for damage. Replace if damaged.
Inspect cold start advance solenoid (10) for damage. Replace if damaged.
Inspect insulators (9) and plunger (11) for damage, Replace if damaged,
Inspect insulators (13) and electrical shutoff solenoid (12) for damage. Replace if damaged.
Refer to para. 2-10 for general inspection instructions for all other injection pump parts.
2-106
|
|
