d. Assembly
TM 9-2815-237-34
2-40. FAN DRIVE REPAIR (Cont’d)
1.
2.
3.
4.
5.
6.
7.
8.
NOTE
For general assembly instructions, refer to para. 2-12.
Install O-ring (4) in groove inside cylinder assembly (3).
Install cylinder assembly (3) on housing (5).
Install large O-ring (9) and small O-ring (8) on shaft assembly (13).
Lubricate roller bearing (6) with lithium grease,
Install shaft assembly (13) and spring (7) in housing (5).
Install shaft assembly (13) on cylinder assembly (3) with tabwasher (2) and locknut (1). Tighten
locknut (1) to 96 lb-in. (11 N•m).
Install friction lining (12) in housing (5).
Install three retaining plates (11) on housing (5) with six screws (10). Tighten screws (10) to
22 lb-in. (3 N•m),
2-152
|
|
