Quantcast ENGINE  ASSEMBLY  FROM  SUBASSEMBLIES  (Contd) - TM-9-2815-237-34_200

Custom Search
 
  
 
TM  9-2815-237-34 2-41.  ENGINE  ASSEMBLY  FROM  SUBASSEMBLIES  (Cont’d) 27. 28. 29. 30. 31. 32. Install remaining bearing caps (2) on cylinder block (8) with long capscrews (4) and short capscrews  (5).  Tighten  capscrews  (4)  and  (5)  to  40  lb-ft  (54  N•m). Evenly  tighten  all  long  capscrews  (4)  to  110  lb-ft  (149  N•m). Evenly  tighten  all  short  capscrews  (5)  to  100  lb-ft  (136  N•m). NOTE Perform  steps  30  through  32  for  6.5L  engines. Coat rear crankshaft (7) surface with engine oil, and lightly coat lip of rear main oil seal (9) with engine  oil. Insttall  rear  main  oil  seal  (9),  with  spring  Cavity  towards  cylinder  block  (8),  on  crankshaft  (7). Using  seal  installer,  drive  rear  main  oil  seal  (9)  in  until  tool  bottoms  against  cylinder  block  (8)  and 2-157


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +