Quantcast r. Rocker Arm Shaft and Pushrods

Custom Search
 
  
 
TM 9-2815-237-34 2-41.  ENGINE  ASSEMBLY  FROM  SUBASSEMBLIES  (Cont’d) r. Rocker Arm Shaft and Pushrods CAUTION Marked ends of pushrods must point up when installed or engine damage  may  result. 1. Install eight pushrods (1) in proper location with marked end of pushrods (1) up. Make sure pushrods  (1)  are  properly  seated. 2. Install two rocker arm and shaft assemblies (2) on cylinder head (6). Make sure pushrods (1) properly  seat  in  rocker  arms  (3). 3. Secure rocker arm and shaft assemblies (2) with four retainers (4) and capscrews (5). Tighten capscrews (5) to 41 lb-ft (56 N•m). 4.  Repeat  steps  1  through  3  for  opposite  side. 2-176


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.