TM 9--2815--247--34 0026 00--5 ROCKER ARM COVER ASSEMBLY REPLACEMENT -- CONTINUED 0026 00 Removal -- Continued NOTE Steps 9 and 10 apply only to cylinder 1R. 9.   Remove screw (20) and loosen two screws (21) from damper side of rocker arm cover assembly (13). CAUTION Do not damage gasket between adapter and rocker arm cover assembly. Failure to comply will result in prema- ture failure. 10. Carefully separate adapter (22) and gasket (23) from rocker arm cover assembly (13). Discard gasket. 20 21 22 21 13 23 11. Remove four screws (24) and four flat washers (25). 12. Remove seven screws (26) and seven flat washers (27). 13. Remove screw (28) and flat washer (29). Figure 5 25 24 27 26 ²⁷26 28 29 26 27 24 25 26 27 26 27