TM 9--2815--247--34 0034 00--1 AFTERCOOLER BY--PASS HOUSING ASSEMBLY REPAIR 0034 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Inspection, Repair, Assembly, Installation INITIAL SETUP: Tools General mechanic’s tool kit (item 19, WP 0103 00) Materials/Parts Gaskets (2) (item 32, WP 0102 00) Preformed packing (item 70, WP 0102 00) Preformed packing (item 72, WP 0102 00) Seal rings (2) (item 125, WP 0102 00) Retaining ring (item 119, WP 0102 00) Lubricant (item 11, WP 0100 00) Lubricant (item 12, WP 0100 00) Safety goggles (item 28, WP 0100 00) Equipment Conditions Intake manifold and aftercooler assembly removed (WP 0031 00) Removal NOTE The procedures are the same for both the right and left bank aftercooler by--pass assemblies. Only the left bank is shown. 1.   Remove by--pass vent line (1) from aftercooler by--pass assembly (2). 2.   Remove five screws (3), five flat washers (4), cover (5), and gasket (6) from intake manifold and aftercooler as- sembly (7). Discard gasket. 3.   Remove aftercooler by--pass assembly (2) and gasket (8) from intake manifold and aftercooler assembly (7). Dis- card gasket. Figure 28 1 2 3 4 5 6 8 7