TM 9--2815--247--34 0048 00--8 THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS REPAIR -- CONTINUED 0048 00 Inspection -- Continued 4.   Measure inside diameter (71) of two needle bearings (66). Replace needle bearing if not within the following lim- its. 5.   Measure outside diameter (72) of two needle bearings (66). Replace needle bearings if not within the following limits. 6.   Measure inside diameter (73) of solenoid control housing (44). Replace solenoid control housing if not within the following limits. REF NO POINT MEASUREMENT SIZES AND FITS OF NEW PART inches (mm) WEAR LIMITS 71 Inside diameter of needle bearings 0.6255 (15.89) 0.6265 (15.91) none 72 Outside diameter of needle bearings 0.8120 (20.62) 0.8120 (20.62) none 73 Inside diameter of solenoid control housing 0.8120 (20.62) 0.8130 (20.65) none Figure 47 66 71 72 44 73