TM 9--2815--247--34
0048 00--12
THROTTLE CONTROL SOLENOID ASSEMBLY AND ASSOCIATED PARTS
REPAIR -- CONTINUED
0048 00
Repair
1. Replace loose, bent, or damaged pin (79). Refer to WP 0012 00.
2. Replace any loose, bent, or damaged pins (81 or 82). Refer to WP 0012 00.
3. Remove and discard two sleeve bearings (85) in fuel shut--off lever assembly (24).
4. Install two new sleeve bearings (85) in fuel shut--off lever assembly (24).
NOTE
Bearings must be installed 0.250 inch (6.35 mm) below
end surface of lever.
5. Ream two sleeve bearings (85) to a diameter of 0.6270--0.6290 in (15.926--15.977mm).
6. Replace loose, bent, or damaged pin (87). Refer to WP 0012 00.
7. Replace loose, bent, or damaged pin (89). Refer to WP 0012 00.
Figure 47
82
81
89
87
79
24
85
85
|
|
