TM 9--2815--247--34
ENGINE ON MAINTENANCE STAND INSTALLATION -- CONTINUED
0056 00
Removal
1. Attach sling (1) to hoist and engine (2) at lifting eyes (3), (4), and (5).
2. Take slack out of sling (1).
3. Remove four screws (7) and four flat washers (8) from stand (6).
4. With helper guiding engine (2), hoist out of stand (6).
5. Move stand (6) from under engine (2).
6. With helper guiding engine (2), lower onto flat surface.
7. Remove sling (1) from engine (2) and hoist.
Figure 70
1
2
3
4
5
6
7
8
NOTE
FOLLOW--ON MAINTENANCE:
Install generator, bracket and oil hoses
(TM 9--2350--292--20)
Install starter and cradle
(TM 9--2350--292--20)
Install all engine wiring harnesses
(TM 9--2350--292--20)
Service engine (TM 9--2350--292--20)
END OF TASK
0056 00--3/4 blank
|
|
