TM 9--2815--247--34
0061 00--12
CYLINDER HEAD ASSEMBLY REPAIR -- CONTINUED
0061 00
Repair -- Continued
NOTE
After new valve guides are installed, they must be
reamed to specified size to assure proper clearance be-
tween valve guide and valve stem. The intake and ex-
haust valve guides are reamed in the same manner.
Separate reamers and bushings are used for each.
12. Install appropriate reamer bushing (31) and hand reamer (32).
Figure 72
32
31
13. Ream guide with appropriate rough hand reamer (32) and then with finish reamer.
Figure 72
32
|
|
