TM 9--2815--247--34 0062 00--1 OIL SEAL HOUSING ASSEMBLY AND ASSOCIATED PARTS REPLACEMENT 0062 00 THIS WORK PACKAGE COVERS: Removal, Repair, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00) Mechanical puller (2) (item 74, WP 0103 00) Torque wrench (item 49, WP 0103 00) Materials/Parts Gasket (item 16, WP 0102 00) Self--locking nuts (4) (item 49, WP 0102 00) Sealant (item 21, WP 0100 00) Lubricant (item 15, WP 0100 00) Lubricant (item 12, WP 0100 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Transmission case adapter removed (WP 0022 00) Flywheel adapter assembly removed (WP 0025 00) Removal 1.   Remove three screws (1) and oil seal retainer (2) from oil seal cap (3). 2.   Remove three screws (4) and retainer (5) from oil seal housing (6). 3.   Remove four self--locking nuts (7) and four flat washers (8) attaching oil seal cap (3) to oil seal housing (6). Dis- card self--locking nuts. 4.   Remove 20 screws (9) and 20 flat washers (10) attaching oil seal cap (3) and oil seal housing (6) to block. Figure 2 1 2 3 4 5 6 7 8 9 10