Quantcast Inspection -- Continued - TM-9-2815-247-34_487

Custom Search
 
  
 
TM 9--2815--247--34 0070 00--9 CONNECTING ROD ASSEMBLY AND ASSOCIATED PARTS REPAIR -- CONTINUED 0070 00 Inspection -- Continued 16. Disassemble connecting rod (3), and cap (2), and remove bearings (4 and 5). 17. Check contact of bearings (4 and 5) between rod (3) and cap (2) as shown by Prussian blue transfer. Replace any bearing that does not make at least 75 percent contact. Repair 1.   Replace any damaged bolts (13) found during inspection. 2.   Replace connecting rod bearings (4 and 5) that do not check within limits specified during inspection and repeat Inspection steps 9 through 13, 16, and 17. 5 4 2 3 13 3.   Replace any connecting rod assemblies (9) that do not check within limits specified during inspection. Figure 8 9 10.998 MIN. (279.3492 MM) 11.002 MAX. (279.4508 MM) 4.0941 MIN. (103.99014 MM) 4.0946 MAX. (104.00284 MM)


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +