TM 9--2815--247--34
0076 00--2
CAMSHAFT, DRIVE GEARS, AND ASSOCIATED PARTS REPAIR --
CONTINUED
0076 00
Removal
1. Remove six screws (1) and six flat washers (2) from access cover (3).
2. Remove access cover (3) and gasket (4). Discard gasket.
3. Remove retaining ring (5) from bevel gear shaft (6). Discard retaining ring.
4. Using mechanical puller (7), remove lubrication fitting (8).
5. Using mechanical puller (7), remove shouldered shaft (9).
Figure 10
FORWARD
1
2
3
4
5
6
7
8
9
LEFT
BANK
RIGHT
BANK
|
|
