TM 9--2815--247--34 0078 00--2 PUMP DRIVE ADAPTER ASSEMBLY REPAIR -- CONTINUED 0078 00 Inspection 1.   Inspect adapter (4) for cracks or damage. Refer to WP 0012 00. 2.   Measure inside diameter of bearing sleeve (5) against the following limits. NOTE If the bearing sleeve is within limits, skip step 3 and do not remove bearing sleeve. 3.   Measure the inside diameter (6) of adapter (4) against the following limits. REF NO. POINT OF MEASUREMENT SIZES AND FITS OF NEW PARTS inches (mm) WEAR LIMITS 5 Inside diameter of split bushing-- type bearing in camshaft end sup- port 1.3120 (33.3248) 1.3130 (33.3502) 1.3140 (33.3756) 6 Inside diameter of camshaft end support 1.4990 (38.0746) 1.5000 (38.1000) 1.5005 (38.1127) Repair 1.   Replace adapter (4) if not within the specified limits. 2.   Replace bearing sleeve (5) if not within the specified limits. Refer WP 0012 00 Figure 11 6 4 5