TM 9--2815--247--34 0080 00--1 OIL PAN ASSEMBLY REPAIR 0080 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Inspection, Repair, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 19, WP 0103 00 ) Dial indicator (item 22, WP 0103 00) Torque wrench (item 50, WP 0103 00 ) Sling assembly (item 14, WP 0103 00) Pliers, snap ring (item 44, WP 0103 00 ) Torque wrench (item 51, WP 0103 00) Materials/Parts Packings with retainers (3) (item 59, WP 0102 00) Gasket (item 28, WP 0102 00) Retaining rings (2) (item 121, WP 0102 00) Gaskets (2) (item 29, WP 0102 00) Gasket (item 24, WP 0102 00) Gasket (item 25, WP 0102 00) Self--locking nuts (56) (item 47, WP 0102 00) Lockwashers (8) (item 148, WP 0102 00) Pipe plug (item 97, WP 0102 00) Expansion plugs (2) (item 96, WP 0102 00) Pipe plugs (6) (item 101, WP 0102 00) Pipe plugs (3) (item 108, WP 0102 00) Gasket (item 153, WP 0102 00) Materials/Parts -- Continued Retaining ring (item 46, WP 0102 00) Gasket (item 9, WP 0102 00) Pipe plugs (2) (item 99, WP 0102 00) Sealant (item 21, WP 0100 00) Lubricant (item 12, WP 0100 00) Gaskets (2) (item 27, WP 0102 00) Equipment Conditions Engine on maintenance stand (WP 0056 00) Oil gauge rod tube removed (TM 9--2350--292--20) Oil pan drain tubes removed (TM 9--2350--292--20) Personnel Required Two References TM 9--2350--292--20 Removal 1.   Remove eight screws (1), eight lockwashers (2), and eight flat washers (3) from bottom of oil pan (4). Discard lockwashers. Figure 16 1 2 3 4