TM 9--2815--247--34 0088 00--6 AUTOMATIC FUEL INJECTION ADVANCE CONTROL ASSEMBLY AND ASSOCIATED PARTS REPAIR -- CONTINUED 0088 00 Disassembly -- Continued 8.   Remove adjusting ring (16), flyweight assembly (17), and fluid regulating valve (26) from housing (27) as an as- sembly. Figure 33 16 17 26 27 9.   Remove two threaded pins (24) and separate adjusting ring (16) and fluid regulating valve (26). 10. Remove two flyweight assemblies (17), two compression springs (28), four timing advance retainers (20), and four seats (30) from adjusting ring (16). NOTE Compression springs and seats are attached to fly- weights with roll pins driven through timing advance re- tainer loops. 11. Disconnect two compression springs (28), four seats (30), four timing advance retainers (29) and four spring pins (31) from two flyweights (17). Discard spring pins. Figure 33 24 24 16 26 17 17 28 29 29 30 30 31 31