TM 9--2815--247--34 0105 00--4 DISASSEMBLY/ASSEMBLY PROCEDURE SEQUENCE FOR THE AVDS 0105 00 1790--8CR ENGINE -- CONTINUED Table 1. ENGINE DISASSEMBLY PROCEDURES SEQUENCE -- CONTINUED Sequence Number Reference Description Task 63. REMOVE 1--2--3 right exhaust manifold, 1--2--3 right exhaust elbow WP 0030 00 64. REMOVE 1--2--3 left exhaust manifold, 1--2--3 left exhaust elbow WP 0029 00 65. REMOVE Accessory drive housing “rear fan tower” breather tee TM 9--2350--292--20 66. REMOVE 4--5--6 left exhaust manifold, 4--5--6 left exhaust elbow WP 0029 00 67. REMOVE Right exhaust manifold, 4--5--6 right exhaust elbow WP 0030 00 68. REMOVE All clamps associated with tubes and hoses in vee TM 9--2350--292--20 69. REMOVE Fuel return hose from metering pump WP 0039 00 70. REMOVE Fuel cutoff electrical lead WP 0039 00 71. REMOVE Metering pump fuel inlet hose TM 9--2350--292--20 72. REMOVE Breather tube and adapter TM 9--2350--292--20 73. REMOVE Metering pump oil supply hose WP 0039 00 74. REMOVE Turbocharger oil supply hose in vee TM 9--2350--292--20 75. REMOVE Fire extinguisher tube WP 0055 00 76. REMOVE Left and right turbocharger mounting bases WP 0041 00 and WP 0042 00 77. REMOVE Tie rod, left and right turbocharger support to transmission adapter WP 0044 00 78. REMOVE Intermediate lever support on front fan tower with spring bracket, adjustable throttle rod, throttle rod to metering pump, fuel shut--off spring bracket on metering pump, spring, fuel shut--off rod WP 0039 00 79. REMOVE Left and right lower rear shroud, left and right cylinder base shroud, 6 right and 6 left cylinder baffle, left and right upper and lower camshaft drive shroud WP 0053 00 80. REMOVE Manual fuel cutoff rod, shutoff spring and bracket from metering pump, throttle rod from metering pump, adjustable rod, spring bracket and lever support, shaft and intermediate throttle lever WP 0039 00 81. REMOVE Injection line clamp brackets WP 0037 00 82. REMOVE Fuel metering pump “set timing” WP 0039 00 83. REMOVE Fuel injection nozzles WP 0036 00 84. REMOVE All valve adjusting covers WP 0026 00 85. REMOVE Camshaft housing covers, oil transfer plugs, quill shafts, right camshaft, left camshaft WP 0076 00 86. REMOVE Mechanical drive housing “front fan tower” WP 0096 00 87. REMOVE Mechanical drive housing base “front fan tower base” WP 0097 00 88. REMOVE Fuel metering pump mounting base WP 0089 00 89. REMOVE Accessory housing WP 0085 00 90. REMOVE Accessory housing base WP 0087 00 91. REMOVE Alternator inlet and drain hose TM 9--2350--292--20