TM 9-2815-250-24&P
2-19. OIL TUBE ASSEMBLIES REPLACEMENT (continued).
b.
INSTALLATION
1.
Install two oil tube assemblies (9 and 15), fluid passage bolt (3), connector (17), bushing (16), and six new
washers (2) on crankcase (8). Loosely install screw (1) in fluid passage bolt (3).
2.
Install four new washers (5) on two cylinder heads (6) and oil tube assembly (15) and secure loosely with two fluid
passage bolts (4).
3.
Install new O-ring (10) on plate (11). Install plate (11) and two screws (13) on timing cover (7).
4.
Install two new washers (12) and fluid passage bolt (14) on plate (11) and oil tube assembly (15).
5.
Tighten screw (1) and two fluid passage bolts (4).
FOLLOW-ON TASKS:
Install fuel pressure pipe assemblies (para 2-23).
Install oil switch (para 2-25).
Install airflow deflectors (para 2-24), if any were removed.
2-12
|
|
