TM 9-2815-250-24&P
2-23. FUEL PRESSURE PIPE ASSEMBLIES AND RETURN FUEL HOSE REPLACEMENT (continued).
4.
Install clamp (7) onto fuel pressure pipe assemblies
(9 and 12) and secure with nut (6) and screw (8).
5.
Install two fuel pressure pipe assemblies (9 and 12)
and clamp (7) on two injection pump fittings (11) and
fuel injector fittings (10). Secure by tightening two
fuel pressure pipe nuts on each of two fuel pressure
pipe assemblies (9 and 12).
6.
Install clamp (1), new spring tension washer (2), and screw (3) on return fuel hose (4) and air duct bracket (5).
FOLLOW-ON TASKS:
None
2-23
|
|
