TM 9-2815-250-24&P
3-6.
CRANKCASE REPAIR (continued).
5.
Install air duct bracket (12) on upper crankcase (23) and lower crankcase (22). Secure loosely with two screws
(13), four washers (11), and two nuts (10)
6.
Install three screws (8), six washers (9), and three nuts (14) loosely securing upper crankcase (23) to lower
crankcase (22) on starter side of engine.
7.
Install three screws (19), washers (20), and nuts (5) loosely securing upper crankcase (23) to lower crankcase
(22) on injection-pump side of engine.
8.
Install screw (4), two washers (3), and nut (21) loosely securing upper crankcase (23) to lower crankcase (22) on
injection-pump side of engine.
9.
Tighten nine screws (13, 8, 19, and 4), starting with the center front and back of the engine.
10.
Install new gasket (15), access cover (16), and two new spring tension washers (17) and screws (18) on upper
crankcase (23).
11.
Install new gasket (7) and hose coupling (6) on upper crankcase (23).
3-23
|
|
