TM 9-2815-250-24&P
3-10. ROCKER ARM ASSEMBLIES REPAIR.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Self-locking nut (4) (Item 15, Appendix F)
General mechanic's tool kit, automotive
Shim (1 or 2) (Item 42 or 43, Appendix F)
(Item 15, Appendix G)
Snapring pliers (Item 26, Appendix G)
Equipment Conditions:
Torque wrench, 1/2-inch drive (Item 31,
Rocker arm covers and gaskets removed
Appendix G)
(para 2-17).
Materials/Parts:
Retaining ring (4) (Item 20, Appendix F)
a.
REMOVAL
NOTE
There are two rocker arm assemblies on the engine, each containing two rocker
arms. Repeat steps 1 through 4 to remove both assemblies.
1.
Remove two self-locking nuts (7) and rocker arm bracket (8) from two studs (10). Discard self-locking nuts.
2.
Remove two retaining rings (1) and any shims (2 or 3) from rocker arm bracket (8). Discard retaining rings and
shims.
3-38
|
|
