Quantcast FIGURE 3-21.  Starter Connection and Mounting Hardware - TM-9-2815-252-24_66

Custom Search
 
  
 
ARMY TM 9-2815-252-24 AIR FORCE TO 38G1-92-2 FIGURE 3-21.  Starter Connection and Mounting Hardware c.  Remove two through bolts (3). d.  Remove screws (4) securing brush holder assembly (5) to rear bracket (6) and remove rear bracket. e.  Remove brush holder assembly (5) and frame assembly (7). f.  Using a screwdriver, pull brushes upward and remove brush holder assembly (5) from frame assembly (7). g.  Remove armature (8). h.  Remove screws (9) and cover (10). i.  Remove retaining ring (11), washer (12), and gasket (13) from shaft. CAUTION Center bracket (15) has spring tension.  Use care when removing screw (14) to avoid damaging parts. j.  Remove screw (14) and center bracket (15) from front bracket (16). NOTE Count washers (17).  They are used to adjust shaft end play. k.  Remove washer(s) (17). NOTE Note direction that lever assembly is installed before removing it.  This will aid in reassembly. 3-46


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.