ARMY  TM  9-2815-254-24 AIR   FORCE   TO   38G1-94-2 ac. Install oil pump, refer to paragraph 3-18.3. ad. Install crankcase, refer to paragraph 3-29.3. ae. Install cylinder head, refer to paragraph 3-27.6. af. Install fuel injection pump, refer to paragraph 3-11.6. ag. Install idler gear and shaft, refer to paragraph 3-30.5. ah. Install front cover, refer to paragraph 3-25.3. ai. Install oil pan, refer to paragraph 3-17.3. aj. Install PCV system, refer to paragraph 3-20.3. ak. Install water pump, refer to paragraph 3-7.4. al. Install alternator, refer to paragraph 3-24.6. am.  Install  starter,  refer  to  paragraph  3-23.6. an. Install fuel filter assembly, refer to paragraph 3-9.4. ao. Install oil filter, refer to paragraph 3-14.3. 3-29. CRANKCASE. 3-29.1. Removal. a. Remove oil pan, refer to paragraph 3-17.1. b. Remove  two  screws  (1,  FIGURE  3-98)  securing  crankcase  to  flywheel  housing. C. Remove  two  bolts  (2)  two  bolts  (3)  two  screws  (4)  and  fourteen  screws  (5)  securing  crankcase (6) to engine block. d. Remove  crankcase  (6)  from  engine  block  using  a  screwdriver  or  pry  bar  in  slit  provided  on crankcase  mounting  flange.  Remove  two  shims  (7). 3-29.2.   Inspection. a. Inspect  crankcase  for  cracks,  deformities,  or  other  damage.  If  found,  replace  crankcase. b. Remove  any  traces  of  sealing  compound  (FORMAGASKET2)  from  mating  surfaces  of  crankcase and engine block. 3-148   Change   2