Quantcast FIGURE 3-70.  Removing Weight Retainer (Typical)

Custom Search
 
  
 
ARMY TM 9-2815-255-24 AIR FORCE TO 38G1-95-2 MARINE CORPS TM 2815-24/4 as. Remove snap ring (30, FIGURE 3-52) and carefully lift rotor from weight retainer (31).  Replace head on rotor. Reinstall rotor retainer and liner locating ring, refer to FIGURE 3-70. FIGURE 3-70.  Removing Weight Retainer (Typical) at. Remove screw (32, FIGURE 3-52), valve stop (33), spring (34), and delivery valve (35) from rotor.  If delivery valve does not slide out freely from bore, use extractor (13383) to remove it, refer to FIGURE 3-71. FIGURE 3-71.  Removing Delivery Valve au. If damaged, remove four fuel connectors (36, FIGURE 3-52) from head. av. Remove retaining ring (37), spring washer (38), thrust washer (39), and drive shaft (41). aw. Remove drive shaft seals (40). ax. If required, press bushings (77, 78, and 79, FIGURE 3-45) from housing (80) and replace. 3-27.3.  Cleaning. Warning Cleaning solvent Is flammable and toxic to eyes, skin, and respiratory tract.  Skin/eye protection required.  Avoid repeated/prolonged contact.  Good general ventilation is normally adequate. Parts should be washed in dry cleaning solvent (P-D-680) and then placed in a clean pan containing clean diesel fuel or calibrating oil. 3-97


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +