ARMY TM 9-2815-255-24
AIR FORCE TO 38G1-95-2
MARINE CORPS TM 2815-24/4
310. WATER PUMP.
Do not drain coolant until coolant temperature Is below operating temperature
prior to removal. Severe personal Injury can occur.
Drain coolant system if not already drained. Refer to end item maintenance manual.
Loosen hose clamp and remove inlet hose from water pump inlet.
Loosen four hose clamps (1, FIGURE 3-3) and disconnect cooler hoses (2) at water pump.
Remove screw (3) and washer (4) and remove clamp (5). Disconnect and remove hoses (2).
Loosen hose clamp and remove by-pass hose from water pump.
Remove fan drive belts, refer to end item maintenance manual.
Remove fan and spacer, refer to end item maintenance manual.
FIGURE 3-3. Engine Oil Cooler Hoses