ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
Remove cylinder head gasket (3), inspect for possible oil, coolant, or combustion chamber leaks. Also, check for
evidence of incorrect or defective head gasket being used.
Do not rotate crankshaft with cylinder head removed unless all cylinder liners are secured with cap
screws and large flat washers.
Remove twelve cam followers from bores in engine block and tag them as to their location for assembly
Inspect and Measure Prior to Disassembly.
Measure and record valve recess dimensions for all valves using a depth micrometer or magnetic base dial
Measurements should be made a maximum of 0.12 inch (3.0 mm) in from edge of valve head OD.