ARMY TM 9-2815-256-24
AIR FORCE TO 38G1-96-2
MARINE CORPS TM 2815-24/5
Do not invert crankshaft front oil seal main (inner) lip. Make sure that this seal lip faces inward
towards crankcase to prevent oil leakage. Dust lip (outer) faces installer away from crankcase.
Install timing gear cover (6) on engine.
Rotating cover back and forth slightly to engage seal (5) lip as cover is pushed into position, secure timing gear
cover (6) with two nuts (4), twelve washers (3), two capscrews (2), and ten capscrews (1). Tighten fasteners to
35 ft-lbs (47 Nm).
Install oil pressure regulating valve, refer to paragraph 3-17.3.
Make and install gasket between timing gear cover and oil pan.
Install crankshaft pulley, refer to paragraph 3-38.3.
m. Install oil filler assembly, refer to paragraph 3-18.3.
Install battery charging alternator and alternator mounting bracket, refer to paragraph 3-11.6.
Install water pump, refer to paragraph 3-10.4.
Install fan and fan drive belts, refer to end item maintenance manual.
Service lubrication system, refer to end item maintenance manual.