Quantcast FIGURE 3-56.  Oil Pressure Test Setup

Custom Search
 
  
 
ARMY TM 9-2815-256-24 AIR FORCE TO 38G1-96-2 MARINE CORPS TM 2815-24/5 FIGURE 3-56.  Oil Pressure Test Setup 3-22.  OIL BYPASS VALVE ASSEMBLY. 3-22.1.  Removal. a. Remove four bolts (4, FIGURE 3-52), two capscrews (3), and six lockwashers (2) from front of oil pan. b. Remove timing gear cover and front plate, refer to paragraphs 3-39.1.  and 3-42.1. c. Remove oil bypass valve and spring, refer to FIGURE 3-57. FIGURE 3-57.  Oil Bypass Valve Installation 3-22.2.  Inspect and Measure. a. Inspect valve and spring for damage. b. Using a spring tester apply 21 to 25 pounds (92 to 112 N) valve spring.  Length should be 1.34 inches (34 mm). Replace spring if not within specifications. 3-74


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +