ARMY TM 9-2815-260-24
AIR FORCE TO 38G1-126-2
MARINE CORPS TM 09244A/09245A-24
4.6. FUEL SYSTEM MAINTENANCE
Escaping diesel or JP fuel under pressure can have sufficient force to
penetrate the skin, causing serious injury or death. Before disconnecting
fuel lines, be sure to relieve pressure. Before applying pressure to the
system, be sure all connections are tight and lines, pipes, and hoses are not
damaged. Keep hands and body away from pinholes and nozzles which
eject fuel under pressure. Use a piece of cardboard or wood, rather than
hands, to search for suspected leaks.
If diesel or JP fuel is injected into skin, seek medical attention immediately.
Failure to comply can result in serious injury.
4.6.1. FUEL INJECTION PUMP.
The following procedures require complete access to the engine. If
necessary, remove engine from generator set, refer to TM 9-6115-672-14.
Mount engine on repair stand (NSN 4910-01-016-1835 or equal) as outlined
in paragraph 4.10.
If working on fuel injection pump on TQG, refer to TM 9-6115-672-14 for
removal and installation procedure for electrical actuator.
Disconnect negative cable from batteries.
Cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract.
Skin and eye protection are required. Avoid repeated/prolonged contact.
Provide adequate ventilation. Failure to comply could result in serious
injury or death.
Care should be exercised when using steam for cleaning. Steam is
extremely hot. Skin and eye protection are required. Avoid contact with