ARMY TM 9-2815-260-24
AIR FORCE TO 38G1-126-2
MARINE CORPS TM 09244A/09245A-24
Before removal, perform inspection (paragraph 4.8.1.a) of flywheel and ring gear while mounted
to engine. Replace flywheel if damaged.
For installation of flywheel, refer to 4.8.1.d.
FIGURE 4-55 FLYWHEEL RING GEAR
Flywheel is heavy. Provide adequate lifting device to support weight.
Failure to comply could result in serious personal injury.
Place flywheel on guidestud and slide into position against crankshaft.
Apply Thread Lock (Appendix E) to threads of all bolts and finger tighten. Torque all bolts to 102
lb-ft (138 Nm).