ARMY TM 9-2815-260-24
AIR FORCE TO 38G1-126-2
MARINE CORPS TM 09244A/09245A-24
5-26
d. Assembly.
(1)
Install nameplate (104, Figure 5-1) and screws (103).
(2)
Position fuel injection pump housing (1), flange facing up, on arbor press. Ensure fuel injection
pump housing is resting flatly.
CAUTION
Lubricants can cause damage to fuel side seal. Do not use any lubricants on
fuel side seal when installing. Failure to comply could result in damage to
fuel side seal.
(3)
Position fuel side seal (Figure 5-29) into fuel injection pump housing (1, Figure 5-1) bore with
seal lip facing downwards. Position seal installation tool into fuel injection pump housing bore.
Press fuel side seal in using arbor press until seal installation tool bottoms.
FIGURE 5-29. FUEL SIDE SEAL INSTALLATION
(4)
Install spacer (70, Figure 5-1).
(5)
Apply light coating of Lubriplate grease to seal bore inside fuel injection pump housing (1).
Install oil side seal (Figure 5-30) in fuel injection pump housing with seal lip facing outward using
installation tool and arbor press.
|
|
