ARMY TM 9-2815-260-24
AIR FORCE TO 38G1-126-2
MARINE CORPS TM 09244A/09245A-24
Install thrust spring (1, Figure 5-34) on top of thrust washer (2, Figure 5-33). Install retaining ring
(2, Figure 5-34) using snap ring pliers (20044).
FIGURE 5-34. SPRING WASHER AND RETAINING RING
Place new timing mark on hub as follows:
Place the rotor assembly onto the timing locator (20395) with drill point in rotor drive
tang aligned with tool pointer. Refer to Figure 5-35.
FIGURE 5-35. TIMING MARK LOCATOR