ARMY TM 9-6115-666-13&P
AIR FORCE TO 35C2-3-505-1
1.4. PREPARATION FOR STORAGE AND SHIPMENT.
1.4.1. Preparation for shipment. Preservation and other protective measures taken in the preparation of
materiel and accompanying tools and equipment for shipment must be sufficient to protect the materiel against
deterioration and physical damage during shipment.
a. Remove front and rear fire extinguisher from mounting brackets and store in cable storage box.
b. Close all generator set doors.
c. Store ladder on top of cable storage box and secure with straps.
d. Clean all surfaces completely.
e. Ensure all surfaces are completely dry.
f. Lubricate the trailer in accordance to TM 9-2330-376-14&P.
1.4.2. Administrative storage. Refer to Chapter 4, Section VII.
1.5. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATION (EIR).
If your AN/MJQ-1612 or AN/MJQ-1632 needs improvement, let us know. Send us an EIR. You, the user, are
the only one who can tell us what you don't like about your equipment. Let us know why you don't like the
design or performance. Put it on SF 368 (Product Quality Deficiency Report). Mail it to us at Commander,
U.S. Army Aviation and Troop Command, ATTN: AMSAT-I-MDO, 4300 Goodfellow Boulevard, St. Louis, MO
63120-1798. We will send you a reply.
1.6. CORROSION PREVENTION AND CONTROL (CPC).
CPC of Army materiel is a continuing concern. It is important that any corrosion problems with this item be
reported so that the problem can be corrected and improvements can be implemented to prevent the problem
in future items. While corrosion is typically associated with rusting of metals, it can also include deterioration of
other materials, such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of the materials
may be a corrosion problem. If a corrosion problem is identified, it can be reported using STD Form 368,
Product Quality Deficiency Report. Using key words such as "rust", "deterioration", "corrosion", or "cracking"
will insure that the information is identified as a CPC problem. The form should be submitted to the address
specified in DA Pam 738-750.
1.7. QUALITY ASSURANCE (QA)
Refer to Quality Assurance/Quality Control specification MIL-Q-9858A for Quality Assurance/Quality Control