Quantcast Table 2-2. Operator Preventive Maintenance Checks and Services for AN/MJQ-1612 and AN/MJQ-1632

Custom Search
 
  
 
ARMY TM 9-6115-666-13&P
AIR FORCE TO 35C2-3-505-1
Table 2-2. Operator Preventive Maintenance Checks and Services
for AN/MJQ-1612 and AN/MJQ-1632
NOTE
Trailer PMCS is only required prior to, during, and after operation of trailer
NOTE
If equipment must be in continuous operation, check and service only those items that can
be checked and serviced without disturbing operation. Make complete checks and services
when equipment can be shut down. When a procedure is required for both weekly and
before intervals, it is not necessary to do the procedure twice if the equipment is operated
during the weekly period.
Item
Location
Not Fully Mission
No.
Interval
Item to Check/Service
Procedure
Capable if:
WARNING
Before performing any maintenance that requires climbing on or under trailer,
make sure that trailer handbrakes are set and trailer is supported to prevent rolling
or tipping. Injury to personnel could result from trailer suddenly rolling or tipping.
TRAILER
1
Before
VISUAL INSPECTION
a. Check for damage.
Any condition
Body
renders the power
plant not mission
Leveling Jacks
capable.
Lunette
Chains
Identification plates
Class III coolant or any
b. Check on, around
class  fuel  leak  is
and under equipment
detected.
for fuel, oil or coolant
leaks.
2
Before
HANDBRAKE
a. Check operation of
Handbrake lever locked
handbrake levers (1 or
in applied position.
2). Lever should move
freely through its entire
travel.
b. Check adjustment of
handbrake lever (1).
Lever is properly
adjusted when it is
difficult to move beyond
two-thirds of the way to
the applied position. If
out of adjustment, see
step d.
2-11


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.