ARMY TM 9-2815-260-24 AIR FORCE TO 38G1-126-2 MARINE CORPS TM 09244A/09245A-24 5-57 5.4.3.   FRONT PLATE. NOTE The following procedures require complete access to the engine.  If necessary, remove engine from generator set, refer to TM 9-6115-672-14.   Mount engine on repair stand (NSN 4910-01-016-1835 or equal) as outlined in paragraph 4.10. a.   Removal. (1) Remove timing gear cover, refer to paragraph 4.9.3. (2) Remove camshaft, refer to paragraph 5.4.1. (3) Remove fuel injection pump and drive gear, refer to paragraph 4.6.1. (4) Remove oil pump and drive gear, refer to paragraph 5.4.8. (5) Remove idler gears, refer to paragraph 5.4.2. (6) Remove six TORX screws (3, Figure 5-65) securing front plate (2); remove front plate (2). (7) Remove threaded studs (1). (8) Remove oil bypass valve, refer to paragraph 5.4.9. FIGURE 5-65.  FRONT PLATE