| Tweet |
Custom Search
|
|
|
||
 LO 92805257-12
TO 38G2-103-2LC-1
Table 1. Lubricant Table for 3 HP Military Standard Gasoline Engine
Temperature Range
Task-hour
Interval
Lubricant
Capacity
MIL. Symbol
(NATO CODE)
Specification
1.5
OE/HDO 15/40
*4/5 qt or
50 hrs
(0-1236)
(0.77L)
MIL-L-2104
Above + 32F (Above 0C)
0.5
OE/HDO 30
**1.8 qt or
8 hrs
(0-238)
(0.1182L)
***
MIL-L-2104
50 hrs
1.5
*4/5 qt or
50 hrs
OE/HDO 15/40
(0.77L)
-10F to +40F (-23C to
0.5
(0-1236)
**1/8qt or
8 hrs
+5C)
MIL-L-2104
(0.1182L)
***
50 hrs
OEA/APG-PD-1
1.5
*4/5 qt or
50 hrs
-65F to 0F (-50C to -18C)
(D-183)
(0.77L)
MILL-46167
**1/8 qt or
8 hrs
0.5
(0.1182L)
*Crankcase.
**Air Cleaner, -1 and -2 only.
***Oil Can Points, See note 2.
NOTES:
1. FOR OPERATION OF EQUIPMENT IN PROTRACTED COLD TEMPERATURE. -10F (-23C). Remove
lubricant prescribed in table 1 for temperatures above -10F (-23C). Clean parts with dry cleaning solvent
PD-680. Relubricate with lubricants specified in table 1 for temperatures below -l0F (-23C). For arctic
operation refer to FM 9-207.
2. OIL CAN POINTS. Every 25 hours lubricate all exposed adjusting threads with OE/HDO.
3. Insure camwick is lubricated with OE/HDO (sparingly) whenever ignition contact points are replaced or
adjusted.
4. CRANKCASE. Drain crankcase when hot. Every 50 hours drain and refill crankcase, operate engine for five
minutes, check for leaks, check crankcase oil level and bring to full mark.
Copy of this lubrication order will remain with the equipment at all times; instructions herein are mandatory.
CARD 3 OF 4
|
||
|
||
