| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
GAUGE PANEL
3.
Put brackets (7), supports (9) and engine
shutdown switch (8) in position on the gauge
panel and install the nuts to hold these in
position.
4.
Put gauge panel (2), brackets (7), supports (9)
and the shutdown switch as a unit in position on
the engine. Install the bolts to hold the unit in
position.
5.
Connect hose (5) to the oil cooler.
6.
Install clamp (I 1) on the gauge panel bracket.
Connect hose (10) to the gauge panel and
connect hoses (4) and (6) to the engine.
NOTE: Make sure the capillary tube from sending unit
(12) does not make direct contact with the engine.
7.
Install water jacket temperature sending unit (12)
in the regulator housing adapter.
261
|
||
|
||
