| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL TRANSFER PUMP
9.
Remove gear assembly (12) and shaft assembly
(13) from the pump bracket and casing (14).
10.
Remove casing (14) and sleeves (15) from
pump bracket (16).
11.
Remove the O-ring seal from casing (14).
12.
Remove outer seal (17) and inner seal (18) from
bracket (16).
13.
If necessary, remove the two bearings from
bracket (16).
l
ASSEMBLE FUEL TRANSFER PUMP 1256-16
Tools Needed
A
1P510 Driver Group
1
1.
Use tool group (A) to install
the inner and outer
lip type seals in bracket (1).
Make sure the lips
of the seals are in the
position shown at
assembly. Put clean engine
oil on the lips of the
seals.
285
|
||
|
||
