| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
OIL PUMP
REMOVE OIL PUMP
1304-11
start by:
a) remove fuel transfer pump
1.
Drain the coolant from the cooling system.
2.
Drain the oil from the oil pan.
3.
Remove all bolts (1) and (2) to remove adapter
(3) from the engine.
4.
Remove all the bolts and remove oil pump (4)
from the engine. The weight of the pump is 39
kg (85 lb.).
INSTALL OIL PUMP
1304-12
NOTE: The oil pump shaft must turn by hand and the
pump must have oil for lubrication before it is
installed.
1.
Put clean engine oil on the O-ring seals and put
oil pump (1) in position. Make sure the splines
on the pump shaft are correctly engaged with the
splines of the oil pump drive. Install the bolts to
hold the oil pump in position.
2.
Put the gaskets and adapter (2) in position.
Install the bolts to hold the adapter and gaskets
in position.
3.
Fill the engine with oil to the correct level.'
4.
Fill the cooling system with coolant to the correct
level.
end by:
a)install fuel transfer pump
288
|
||
|
||
