| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
OIL FILTER HOUSING
ASSEMBLE OIL FILTER HOUSING
1306-16
1.
Install O-ring seal (2) on adapter (1) and put
clean engine oil on it. Install adapter (1) in the
housing assembly.
2.
Install valve (3) in housing (4) as shown.
NOTE: If valve (3) has been installed wrong, plug (5)
can be installed correctly.
3.
Put clean engine oil on the O-ring seal and install
plug (5) in housing (4).
4.
If pins (6) were removed, install the new pins in
cover (7). Make sure they are 7 0.5 mm (.275
.020 in.) above the surface of the cover.
297
|
||
|
||
