| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
OIL PAN
5.
Fill the engine with oil to the correct level.
REMOVE OIL PAN
1302-11
1.
Drain the oil from the engine.
2.
Remove bolts (1) that hold the oil pump adapter
to the oil pan.
3.
Remove the bolts that hold oil pan (2) to the
engine and lift the engine off of the oil pan or
lower the oil pan away from the engine. The
weight of the 3512 oil pan is 295 kg (650 lb.) and
the weight of the 3508 oil pan is 240 kg (530 lb.).
The weight of the 3512 engine is approximately
5443 kg (12, 000 lb.) and the weight of the 3508
engine is approximately 4445 kg (9800 lb.).
INSTALL OIL PAN
1302-12
1.
Make sure the O-ring seal is installed on the oil
pump adapter and put clean engine oil on it.
2.
Install four 3/8"-16 NC guide bolts in the pan and
put the oil pan gasket in position on the pan.
3.
Put the engine in position on the oil pan or put oil
pan (1) in position under the engine. Install the
bolts that hold the oil pan to the engine.
4.
Install bolts (2) that hold the oil pump adapter to
the oil pan.
300
|
||
|
||
