| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
OIL SEQUENCE VALVES
REMOVE AND INSTALL OIL SEQUENCE
VALVES
start by:
a) remove front drive housing
b) remove flywheel housing
1.
Remove cover (1) from the front of the cylinder
block.
2.
Remove plunger assembly (2) and spring (3)
from the front of the cylinder block.
3.
Remove the gear assembly, idler gear and shaft
from over cover (4) on the rear of the cylinder
block.
4.
Remove cover (4) from the rear of the cylinder
block.
5.
Remove plunger assembly (5) and spring (6)
from the rear of the cylinder block.
6.
Put clean engine oil on spring (6) and plunger
assembly (5) and install them as shown in the
rear of the cylinder block.
7.
Install cover (4). Install the idler gear, shaft and
gear assembly over cover (4) on the rear of the
cylinder block.
8.
Put clean engine oil on spring (3) and plunger
assembly (2) and install them in the front of the
cylinder block as shown.
9.
Install cover (I) to hold the plunger assembly and
spring in position.
end by:
a) install flywheel housing
b) install front drive housing
304
|
||
|
||
