| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
HYDRAMECHANICAL SHUTOFF DRIVE
REMOVE HYDRAMECHANICAL SHUTOFF DRIVE
Tools Needed
A
1P 1855
Pliers
1
start by:
a) remove hydramechanical shutoff control
b) remove tachometer drive
1.
Remove tube assemblies (1) and (2) from the
shutoff drive housing assembly and the engine.
2.
Remove the bolts and remove shutoff drive
housing assembly (3) from the flywheel housing.
3.
Use tool (A) to remove snap ring (5) and the
washer from the end of drive gear (4). Remove
drive gear (4) from the housing assembly.
4.
If necessary, remove dowels (6) from the
housing assembly.
5.
Remove bearing (9) and seal (7) from the
housing assembly. The bearing can be used to
push the seal out of the bore.
6.
Remove two bearings (8) from the drive gear
bore.
7.
If necessary, remove
dowels (10) from the
housing assembly.
8.
Remove gear assembly ( 11 ) from the end of
the crankshaft.
345
|
||
|
||
