| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
SPACER PLATES
INSTALL SPACER PLATES
1221-12
1.
Make sure the spacer plate and the machined
surface of the cylinder block are clean and free
of dirt and foreign material.
2.
Install the O-ring seal around dowel (2).
NOTICE
Both surfaces of the spacer plate gasket and the top
of the cylinder block must be clean. Do not use a
gasket adhesive on these surfaces.
3.
Install new spacer plate gasket (1) over the
dowels in the cylinder block.
4.
Install spacer plate (3) on the dowels.
5.
Install the O-ring seal around dowel (5).
6.
Install new water seals (4) and (6) in spacer
plate (3).
7.
Install new cylinder head gasket (7) on the
spacer plate.
8.
Check the cylinder liner projection.
See
INSTALL CYLINDER LINERS.
end by:
a) install cylinder heads
392
|
||
|
||
