| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE ATTACHMENTS
SPECIFICATIONS
OIL SCAVENGE
PUMP
(1W8505)
Rotation of drive gear (as seen from
drive end) ............................................ Counterclockwise
(1) Length of gears
(new).........110.000 0.015 mm (4.3307+0006 in.)
Depth of bores for gears
(new) ........... 110.15 + 0.02 mm (4.337 + .001 In.)
(2) Diameter of gear shafts
(new) ... 31.742 + 0.008 mm (1.2497 + .0003 In.)
Bore In bearings for gear shafts after assembly
(new) ... 31.837 0.070 mm (1.2534 + .0028 in.)
(3) Distance from the end of the shafts to the
gear faces ............... 34.0 0.5 mm (1.34 .02 in.)
(4) Depth that bearings are installed in pump
body ........................ 1 5 0.5 mm (.06 + .02 in.)
(5) Depth that bearings are installed In
cover ........................ 1.5 0.5 mm (.06 + .02 in.)
(6) Position of bearing joints from the centerline
through the bearing bores ........................ 45 + 15
(7) Distance dowels extend from
cover ....................... 6.4 + 0.5 mm (.25 .02 In.)
NOTE: FOR TORQUE VALUES NOT GIVEN, SEE THE FIRST PAGE OF SPECIFICATIONS FOR GENERAL
TIGHTENING TORQUES
425
|
||
|
||
