| Tweet |
Custom Search
|
|
|
||
 3500 ENGINE ATTACHMENTS
SPECIFICATIONS
TURBOCHARGER IMPELLER INSTALLATION
INSTALLATION PROCEDURE CHART
TURBOCHARGER MODELS
T04, T04B,
TM51
T12, TV61,
T18, TV81,
TV91, TW91,
T04C,
TM54
TW61, TL61
TW81, TL81,
TL91, TV92,
Step by Step Procedure
TW4B, TW4C
TV72, TW72,
TW92, TL92
TL4B, TL4C
TL72, TV78,
TW78, TL78
A. Put impeller on the shaft.
B. Put a small amount of clean oil
on the threads and impeller
face area that contacts the nut.
2.25 Nm
5 Nm
17 Nm
17 Nm
31 Nm
C. Install and tighten the nut to:
(20 lb. in.)
(50 lb. in.)
(13 lb. ft.)
(13 lb. ft.)
(23 lb. ft.)
NOTICE
Do not bend or add stress to
the shaft when the nut is
loosened or tightened.
D. Loosen the nut on the shaft.
*
*
*
*
3.5 Nm
3.5 Nm
5 Nm
E. Now tighten the nut to:
(30 lb. in.)
(30 lb. in.)
(50 lb. in.)
F. Tighten the nut more:
110
120
120
120
135
G. Remove the nut from the shaft.
H. Use 6V1541 Quick Cure
Primer on the threads of the
shaft and nut.
J. Put
9S3265
Retaining
Compound on the threads of
the shaft and nut.
2.25 Nm
5 Nm
3.5 Nm
3.5 Nm
5 Nm
K. Install and tighten the nut to:
(20 lb. in.)
(50 lb. in.)
(30 lb. in.)
(30 lb. in.)
(50 lb. in.)
L. Tighten the nut more:
110
120
120
120
135
*Does not apply to these turbochargers.
427
|
||
|
||
